Deep Groove Ball Bearings For Carry Radial And Axial Load With Two
Seals 2RS on Both Side
They are the most typical rolling bearings with extensive
applications. The raceways in both of the rings are in arc groove
form, which can carry radial and axial load in double directions.
They can be applied in situations where high-rotating speed and low
noise and low vibration are required.
Deep groove ball bearings generally use pressed cages of steel
sheet or brass cages. When the outer diameter is less than
(inclusive)400mm, they use pressed cage with steel sheet. When the
outer diameter is bigger than 400mm, they use brass cages.
Can be found in automobiles, machine tools, motors, instruments,
construct machines, railway vehicles, agricultural machines and
various other special machines
Basic type, With snap ring groove on the outer ring(-N), With one
shield(-Z) on one side or two shields(-2Z) on both sides, With one
seal(-RS)on one side or two seals(-2RS)on both sides.
|Model||Old Model||Boundary dimensions (mm)||Basic load ratings (KN)||Limiting speed (r/min)||Weight (KG)|